[Hi-zreceivingarraydiscussions] Array Voltage Question

[Lee K7TJR]

Brian, the system was designed to give its best IMD performance at 13.8VDC.
It will work fine at lower levels. If you are not hearing any BC station
intermod I would not worry about operating the system at 12.7VDC
Lee  K7TJR 

-----Original Message-----
From: Hi-zreceivingarraydiscussions
[mailto:hi-zreceivingarraydiscussions-bounces at hizantennas.com] On Behalf Of
Brian Sarkisian, KG8CO
Sent: Thursday, January 30, 2014 11:28 AM
To: HI-zreceivingarraydiscussions at hizantennas.com
Subject: [Hi-zreceivingarraydiscussions] Array Voltage Question

The new 30V 3 amp is now connected to the array via the power injectors.

By the time I get everything connected at the Array end, I am seeing 12.7
volts.

The array is working, however I thought I had read some where that that
array needs a minimum of 13.8 volts to work at its peak performance.

What are your thoughts?


Thank you


Brian, KG8CO
_______________________________________________
Hi-zreceivingarraydiscussions mailing list
Hi-zreceivingarraydiscussions at hizantennas.com
http://mail.hizantennas.com/mailman/listinfo/hi-zreceivingarraydiscussions_h
izantennas.com