[Hi-zreceivingarraydiscussions] Array Voltage Question
Lee K7TJR
k7tjr at msn.com
Sat Feb 1 00:31:05 EST 2014
Brian
At your power supply level, increasing the level may or may not decrease any
IMD signals.
If what you see is objectionable we make a set of filters that install at
the antenna/element connection that will help.
Let me know what you think and if needed I will describe the filters to
you.
Lee K7TJR
-----Original Message-----
From: Hi-zreceivingarraydiscussions
[mailto:hi-zreceivingarraydiscussions-bounces at hizantennas.com] On Behalf Of
Brian Sarkisian, KG8CO
Sent: Friday, January 31, 2014 4:52 AM
To: hi-zreceivingarraydiscussions at hizantennas.com
Subject: [Hi-zreceivingarraydiscussions] Array Voltage Question
Hello Lee ...
And that you for the quick e-mail reply. Tuning up and down the band, I did
notice some BCB interference.
I haven't had that problem with my beverages, so I am thinking I should
pickup another PS that has a higher voltage output today.
Do you think I should I should also get some sort of BCB filter ?
Thank you
Brian, KG8CO
________________________________
From: Lee K7TJR <k7tjr at msn.com>
To: "'Brian Sarkisian, KG8CO'" <cqkg8co at yahoo.com>; 'Hi-Z Receiving Array
Discussions' <hi-zreceivingarraydiscussions at hizantennas.com>
Sent: Thursday, January 30, 2014 3:18 PM
Subject: RE: [Hi-zreceivingarraydiscussions] Array Voltage Question
Brian, the system was designed to give its best IMD performance at 13.8VDC.
It will work fine at lower levels. If you are not hearing any BC station
intermod I would not worry about operating the system at 12.7VDC
Lee K7TJR
-----Original Message-----
From:
Hi-zreceivingarraydiscussions
[mailto:hi-zreceivingarraydiscussions-bounces at hizantennas.com] On Behalf Of
Brian Sarkisian, KG8CO
Sent: Thursday, January 30, 2014 11:28 AM
To: HI-zreceivingarraydiscussions at hizantennas.com
Subject: [Hi-zreceivingarraydiscussions] Array Voltage Question
The new 30V 3 amp is now connected to the array via the power injectors.
By the time I get everything connected at the Array end, I am seeing 12.7
volts.
The array is working, however I thought I had read some where that that
array needs a minimum of 13.8 volts to work at its peak performance.
What are your thoughts?
Thank you
Brian,
KG8CO
_______________________________________________
Hi-zreceivingarraydiscussions mailing list
Hi-zreceivingarraydiscussions at hizantennas.com
http://mail.hizantennas.com/mailman/listinfo/hi-zreceivingarraydiscussions_h
izantennas.com
_______________________________________________
Hi-zreceivingarraydiscussions mailing list
Hi-zreceivingarraydiscussions at hizantennas.com
http://mail.hizantennas.com/mailman/listinfo/hi-zreceivingarraydiscussions_h
izantennas.com
More information about the Hi-zreceivingarraydiscussions
mailing list