[Hi-zreceivingarraydiscussions] verticals supports

[Randy Lake]

Put the angle iron in concrete and use separate ground rods. You will want
to keep as much space as possible between any "ground" and the vert element.

Randy N1KWF

On Sat, Dec 20, 2014 at 8:59 PM, Jorge Diez - CX6VM <cx6vm.jorge at gmail.com>
wrote:

> Thanks Gary
>
> OK, will try to do the best to install it in the ground. Anyway I will try
> to do a hole sdo I will be sure to install it right vertically.
>
> If I try to bury hitting with a hammer, may enter twisted and then the
> antenna would look very bad
>
> 73,
> Jorge
>
>
> -----Mensaje original-----
> De: Hi-zreceivingarraydiscussions
> [mailto:hi-zreceivingarraydiscussions-bounces at hizantennas.com] En nombre
> de
> kd9sv
> Enviado el: sábado, 20 de diciembre de 2014 11:18 p.m.
> Para: 'Hi-Z Receiving Array Discussions'
> Asunto: Re: [Hi-zreceivingarraydiscussions] verticals supports
>
> Jorge, the angle iron supports MUST be in contact with the
> ground...concrete
> would be very bad for the system...de gary
>
> -----Original Message-----
> From: Hi-zreceivingarraydiscussions
> [mailto:hi-zreceivingarraydiscussions-bounces at hizantennas.com] On Behalf
> Of
> Jorge Diez - CX6VM
> Sent: Saturday, December 20, 2014 6:31 PM
> To: 'Hi-Z Receiving Array Discussions'
> Subject: Re: [Hi-zreceivingarraydiscussions] verticals supports
>
> Hello Guys
>
> Will be installing new supports for my verticals, galvanized right angle, 2
> x 1/8 and 3 ft long
>
> Grounding will be at this support
>
> May I do a hole and then fill it with concrete? Or the supports that will
> act as ground must be direct on ground and I cannot install them in
> concrete?
>
> Thanks,
> Jorge
> CX6VM/CW5W
>
> -----Mensaje original-----
> De: Hi-zreceivingarraydiscussions
> [mailto:hi-zreceivingarraydiscussions-bounces at hizantennas.com] En nombre
> de
> Rich Chatelain Enviado el: domingo, 23 de noviembre de 2014 12:21 a.m.
> Para: 'Hi-Z Receiving Array Discussions'
> Asunto: Re: [Hi-zreceivingarraydiscussions] verticals supports
>
> Is it possible to cut the bad part off with a Hacksaw by hand?
>
> -----Original Message-----
> From: Hi-zreceivingarraydiscussions
> [mailto:hi-zreceivingarraydiscussions-bounces at hizantennas.com] On Behalf
> Of
> Jorge Diez - CX6VM
> Sent: Saturday, November 22, 2014 2:46 PM
> To: 'Hi-Z Receiving Array Discussions'
> Subject: [Hi-zreceivingarraydiscussions] verticals supports
>
> Hello
>
> Today was a bad day at CW5W trying to install verticals supports
>
> I had all my metal bases to put in the ground, the idea was to bury them
> with a hammer, but the top of the bar was damaged because of too much and
> heavy hits with the hammer
>
> So what do you use as the antennas supports?  I don´t want to guyed the
> verticals, so need something that support them easily
>
> If you have close photos that can send to me I appreciate very much
>
> Thanks in advance
>
> 73,
> Jorge
> CX6VM/CW5W
>
>
> ---
> Este mensaje no contiene virus ni malware porque la protección de avast!
> Antivirus está activa.
> http://www.avast.com
>
>
> _______________________________________________
> Hi-zreceivingarraydiscussions mailing list
> Hi-zreceivingarraydiscussions at hizantennas.com
>
> http://mail.hizantennas.com/mailman/listinfo/hi-zreceivingarraydiscussions_h
> izantennas.com
>
>
> _______________________________________________
> Hi-zreceivingarraydiscussions mailing list
> Hi-zreceivingarraydiscussions at hizantennas.com
>
> http://mail.hizantennas.com/mailman/listinfo/hi-zreceivingarraydiscussions_h
> izantennas.com
>
>
> ---
> Este mensaje no contiene virus ni malware porque la protección de avast!
> Antivirus está activa.
> http://www.avast.com
>
>
> _______________________________________________
> Hi-zreceivingarraydiscussions mailing list
> Hi-zreceivingarraydiscussions at hizantennas.com
>
> http://mail.hizantennas.com/mailman/listinfo/hi-zreceivingarraydiscussions_h
> izantennas.com
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> http://www.avast.com
>
>
> _______________________________________________
> Hi-zreceivingarraydiscussions mailing list
> Hi-zreceivingarraydiscussions at hizantennas.com
>
> http://mail.hizantennas.com/mailman/listinfo/hi-zreceivingarraydiscussions_h
> izantennas.com
>
>
> ---
> Este mensaje no contiene virus ni malware porque la protección de avast!
> Antivirus está activa.
> http://www.avast.com
>
>
> _______________________________________________
> Hi-zreceivingarraydiscussions mailing list
> Hi-zreceivingarraydiscussions at hizantennas.com
>
> http://mail.hizantennas.com/mailman/listinfo/hi-zreceivingarraydiscussions_hizantennas.com
>



-- 
Randy Lake N1KWF
73 Gunn Rd.
Keene,NH