Hi-Z 2  or Hi-Z 2-3 Array Systems 

models

Hi-Z-2-LV2-40  40 foot spacing

Hi-Z-2-LV2-50 50 foot spacing

Hi-Z-2-3-LV2-40 40 foot spacing

Hi-Z-2-3-LV2-50 50 foot spacing

Hi-Z 2 or 2-3 Shack Switch

          OFF/ON     Reverser                                                                                    Axis 90 Degrees

Specifications

·         Maximum RDF 9.1db

·         Two Directions  (Hi-Z-2-LV2-40, -50 ) or Four Directions (Hi-Z-2-3-LV2-40, -50)    ( Hi-Z-2-3-LV2-XX requires one more Hi-Z Amp)

·         Hi-Z-2-LV2-XX requires two verticals and is upgradeable to four directions     (Hi-Z-2-3-LV2-XX requires one more vertical antenna element)

·         Standard Hi-Z-2-LV2-XX system comes with a 4 direction shack switch for ease in any later upgrade to a 4 direction Hi-Z-2-3-LV2-XX

·         Power Requirements 13.8 VDC, 4 conductor control cable (+13.8, GND, CTRL1, CTRL2)

Pattern:

Components Supplied with the Hi-Z-2-LV2-40 or -50  or  Hi-Z-2-3-LV2-40 or -50 Systems

1-      Hi-Z 2-3 phase controller which works for both 2 or 2-3 systems

1 – Hi-Z 2 shack switch which works for both 2 or 2-3 systems

2 or 3 – Hi-Z Amps -- Hi-Z 2 =2 Hi-Z Amps, Hi-Z 2-3 = 3 Hi-Z Amps

1 – Hi-Z 75Ω In-line Pre-amp

1 – Hi-Z 75Ω to 50Ω Transformer

1 – 2 foot long RG6 cables (connect phase controller to in-line pre-amp)

1 – 2 foot long wire with terminals (power to Inline pre-amp)

            Hi-Z 2 or Hi-Z 2-3  Phase Controller                                                     Hi-Z 2 or Hi-Z 2-3 Shack Switch

     Download Manual here

Contact Hi-Z 

Click logo to order from DX Engineering

Hi-Z-2-LV2-40, or -50         Hi-Z-2-3-LV2-40 or -50